Conduit Fill Calculator

Category: Housing/Building

- October 09, 2025

| |

Calculate the appropriate conduit size based on the number and type of conductors according to the National Electrical Code (NEC). The NEC limits conduit fill to 40% for three or more conductors.

Conduit Information

Conduit Type:

Selected Conduit Size:

Conductor Information

Wire Size	Wire Type	Quantity	Area (mm²)	Actions
			8.97

Fill Options

Maximum Fill Percentage:

NEC standard: 40% for 3+ conductors, 31% for 2, 53% for 1

Apply NEC ampacity derating

Conduit Fill Results

Total Fill Percentage

32.4%

ACCEPTABLE - Below the 40% maximum

Total Wire Area

126.5

mm²

Conduit Inner Area

397.4

mm²

Total Conductors

conductors

Maximum Fill Allowed

159.0

mm²

Conduit Size Recommendations

Based on your conductors, a 3/4" conduit is the minimum size required.

Conduit Size	Inner Area	Max Fill (40%)	Your Fill	Status

Ampacity Derating Information

With 9 current-carrying conductors in the conduit, a derating factor of 70% must be applied per NEC Table 310.15(C)(1).

Wire Size	Base Ampacity	Derated Ampacity

Understanding Conduit Fill

The National Electrical Code (NEC) specifies maximum fill percentages for electrical conduits to ensure proper wire cooling and ease of installation. These limits vary based on the number of conductors:

NEC Fill Requirements

1 conductor: Maximum 53% fill
2 conductors: Maximum 31% fill
3 or more conductors: Maximum 40% fill

Fill Percentage Calculation

Fill percentage is calculated by dividing the total cross-sectional area of all conductors by the internal cross-sectional area of the conduit, then multiplying by 100:

Fill % = (Total Conductor Area ÷ Conduit Internal Area) × 100

Ampacity Derating

When multiple current-carrying conductors are bundled in a conduit, heat dissipation becomes restricted. The NEC requires ampacity derating based on the number of conductors:

4-6 conductors: 80% of rated ampacity
7-9 conductors: 70% of rated ampacity
10-20 conductors: 50% of rated ampacity
21-30 conductors: 45% of rated ampacity
31-40 conductors: 40% of rated ampacity
41+ conductors: 35% of rated ampacity

Disclaimer: This calculator provides estimations based on standard NEC guidelines. Always consult the current electrical code and a licensed electrician before making final determinations. Local codes may vary or have additional requirements.

What Is the Conduit Fill Calculator?

The Conduit Fill Calculator is a practical tool for electricians, contractors, and DIY enthusiasts to determine the appropriate size of conduit needed for a given number and type of electrical conductors. It follows the standards set by the National Electrical Code (NEC), which limits how full a conduit can be to ensure safety and efficiency.

Just like a foundation material estimator helps ensure your base is properly filled, this calculator ensures that your electrical system is compliant and performs reliably.

Why Conduit Fill Matters

Overfilling a conduit can lead to overheating, difficulty pulling wires, and code violations. The NEC sets specific maximum fill percentages based on how many wires are in the conduit:

1 conductor: up to 53% fill
2 conductors: up to 31% fill
3 or more conductors: up to 40% fill

Using this calculator prevents oversizing or undersizing, helping you make efficient, code-compliant decisions for your project.

Conduit Fill Formula

Fill % = (Total Conductor Area ÷ Conduit Internal Area) × 100

How to Use the Calculator

Follow these simple steps to get accurate conduit fill results:

Select the conduit type from the dropdown (e.g., EMT, PVC, GRC).
Choose a conduit size that you plan to use.
Add conductor details: wire size, insulation type (THHN, XHHW, etc.), and quantity.
Adjust fill percentage if needed (default is 40% for 3+ wires).
Click "Calculate Conduit Fill" to get results.

The tool will instantly show:

Your current fill percentage
Total conductor and conduit area
Whether your setup is acceptable under NEC rules
Alternative conduit size recommendations

Optional: Ampacity Derating

If you have multiple current-carrying conductors, the calculator can apply ampacity derating as outlined by NEC. This ensures your wires won't overheat, especially in long or crowded conduit runs.

Benefits of Using This Calculator

Stay Code-Compliant: Automatically follows NEC conduit fill limits.
Plan Efficiently: Avoid upsizing unnecessarily, saving on costs and materials.
Improve Safety: Prevent overheating and difficult wire pulls by keeping conduit fill within limits.
Save Time: Instantly get accurate fill and sizing results without manual calculations.

Whether you're working on a new installation or upgrading an existing one, this calculator works alongside tools like the Box Fill Calculator or foundation material guide to streamline your project planning.

Frequently Asked Questions

What if I have only one wire?

The NEC allows a higher fill percentage (up to 53%) if you have only one conductor in the conduit. The calculator accounts for this automatically.

Does the calculator handle different wire types?

Yes, it includes common insulation types like THHN, XHHW, USE, RHW, and even bare copper. Different types affect the cross-sectional area and thus the fill.

Can I use this for flexible conduit?

Absolutely. Just select the appropriate conduit type such as LFMC or LFNC to get correct calculations based on inner diameters.

What if I'm also planning concrete or flooring?

If your project includes planning for floor space, consider using a square footage tool to calculate floor area or a concrete volume estimator to calculate your concrete needs alongside this electrical layout.

Final Tip

This Conduit Fill Calculator complements Other planning tools like the gravel coverage guide, paint quantity planner, and drywall sheet estimator. It ensures your electrical design is both safe and efficient—no overfills, no guesswork.

Always double-check with local electrical codes and consult a licensed electrician for final approval.